IE Audi B8/B8.5 A4 Allroad Performance Tune (2009-2015)

Integrated Engineering

  • $479.75


MFG# IE-B8-ALLROAD-TUNES

  If purchasing without DIY Cable you must book your car in with us. Contact us to book it in here or visit or location 120 Park st Kitchener ON.

Product Features

• Massive horse power & torque increase
• Tune your car quickly from home
• Multiple stages available
• Improved throttle response
• Increased Rev limiter
• Remove Top Speed limiter

IE AUDI A4 Allroad 2.0T TSI PERFORMANCE TUNING

IE's motorsport inspired software brings track-ready ECU programming to your Audi A4 Allroad (B8/B8.5) while retaining factory comfort and reliability. Developed in-house, IE engineers are equipped with industry leading tuning technology to completely reverse engineer the factory mapping and safely modify it to maximize performance. Years of professional tuning high-powered race vehicles and intimate knowledge of the VW & Audi engines results in a wicked fast car on the street or the track. Your new software tune is easily uploaded to your factory installed ECU (engine control module) without touching a wrench in your own driveway. Multiple tunes are available to match your stock or installed aftermarket hardware.

 

POWER GAINS

Stage 1 (stock hardware): +45-55HP & +40-50TQ (ft-lbs) over stock

Stage 2 (requires hardware upgrades): +65-75HP & 65-75TQ (ft-lbs) over stock

*Power figures were measured at the hub performed on a hub dynamometer, power figures are taken from multiple vehicles. Power gains may differ from advertised as individual vehicles will vary in maintenance, mileage, and conditions. HP=horsepower, TQ= Torque ft-lbs. 

DYNO RESULTS


AVAILABLE TUNES

IE STAGE 1

The IE Stage 1 B8 Audi A4 Allroad tune delivers an aggressive power upgrade without having to install any hardware modifications. Perfect for customers looking for a big jump in power without adding any additional hardware. In a matter of minutes, the vehicle will be much more enjoyable to drive with a massive boost in performance. Designed for use with regular pump 91/93 octane, resulting in an instant +45-55HP & +40-50TQ gain.

IE STAGE 2

The IE Stage 2 B8 Audi A4 Allroad performance flash is designed for customers looking to maximize the performance of the factory engine internals and turbochargers. IE Stage 2 software fine-tunes the ECU calibration to match installed aftermarket hardware.  Stage 2 results deliver massive power gains across the powerband, fully realizing the engine and stock turbocharger potential. With required hardware modifications, typical power gains around +65-75HP & 65-75TQ (ft-lbs) over stock. *See additional hardware tab for Stage 2 hardware requirements.

IE K04 TUNE
Ready for more boost? The IE K04 Tune is meticulously designed for bolt-on Borg Warner K04 Turbocharger upgrades and features a completely new ECU calibration to take advantage of the larger turbo efficiency range. Upgrading to a K04 and Tune results in a much wider RPM band and power doesn't taper off like the factory installed K03 turbo. The ECU tune is safely adjusted to take advantage of the larger compressor wheel to reliably release the full potential of the new turbo size, pushing power much higher than available from the stock turbo. Tune includes 91, 93, and 100 octane files for maximum power.  

 

 

EASY AT-HOME TUNE INSTALL

Required to flash your new tune, IE's DIY Flash Tool allows you to quickly upload your tune from your own garage or driveway. This OBD plug-in device is easy to use with a Windows powered laptop and WiFi connection. Your new tool also includes the abilities to switch between multiple octane files (available separately), reading and clearing diagnostic codes, upgrading Stages, or flashing back to stock.  

 

 

UPGRADING TUNES

Already have an IE Stage 1 tune and IE DIY Flash Tool? Upgrading to Stage 2 or beyond is easy! You only pay the difference in cost between the files with no additional or hidden fees. Once the required supporting hardware is installed, simply plug in your DIY Flash Tool and follow the instructions on your screen to purchase and flash the upgrade file.

 

 

TECHNICAL FEATURES

 

DYNOMETER OPTIMIZED

After completely reverse engineering the factory ECU, our engineers use our in-house Dynapack DP42 dynamometer to perform repeated runs to test each change that is made to the software and confirm drivability in any situation. This ensures IE performance software delivers massive horsepower and torque increases across the entire powerband. Using our in-house dyno and advanced tuning tools, IE engineers have fully optimized every aspect of the factory ECU mapping on many different vehicles. This produces a tune that retains all factory like driving and safety protocols when needed, and an intense surge of power when you want it.

 

REMOVED SPEED LIMITER

The factory ECU speed limiter has been removed to make sure the increased power and torque can be used to its full potential on straightaways and drag strips.

 

INCREASED REV LIMIT

With the significant power increase, the rev limiter is also increased to allow a wider powerband on all IE Audi A4 Allroad files. By increasing the rev limit, you gain a perfect match for the increased performance available from your new IE performance software tune.

 

IMPROVED THROTTLE RESPONSE

To further increase the responsive feel of the car, IE engineers have carefully adjusted the throttle sensitivity. This offers a more connected feeling to your car with plenty of power available right beneath your foot.

 

OPTIMIZED FUELING

All IE tunes have been adjusted to run as economically as possible, dialing in air/fuel ratios to exactly where they need to be. With an IE performance ECU flash, it is common to see increased fuel economy under cruising and part-throttle driving.


We Also Recommend